A pool leak inspection covers the whole system: pressure testing every plumbing line, checking the pump and heater and salt system, testing water chemistry, and reviewing safety items like bonding and barriers. It produces a written report whether or not an active leak is found. This is different from a standard leak detection visit, which responds to a specific complaint about water loss. Call (954) 290-5177 or (561) 325-2678 to schedule.
What a Pool Leak Inspection Covers
Circulation plumbing
Main drain, skimmer, returns, and bubbler lines isolated and pressure tested individually.
Pool shell and fittings
Dye testing at the skimmer, light niches, and any suspected crack or fitting.
Equipment
Pump, filter, heater, and salt chlorine generator checked for function and condition.
Water chemistry
Chlorine, pH, alkalinity, hardness, and stabilizer tested against safe operating ranges.
Electrical and bonding
Visual check for bonding wire attachment, conduit support, and disconnect box covers.
Safety compliance
Barriers, self-closing gates, and water clarity checked against Florida code requirements.
How This Is Different From a Leak Detection Visit
A leak detection visit exists because a pool is doing something specific: it's losing water, and the homeowner wants to know why. The visit is scoped around that complaint.
An inspection is broader by design. It's not built around a complaint, it's built around a decision, usually a home purchase, an HOA record, or an insurance requirement, where someone needs to know the real condition of the entire pool system, not just whether one leak can be found. The plumbing still gets pressure tested the same way, but the inspection continues past that into equipment, chemistry, and code compliance, and everything gets written down.
On this inspection, the main drain, vacuum line, skimmer, returns, and bubblers were isolated and held pressure at 15 PSI with no drop, so the plumbing itself wasn't leaking. But the inspection didn't stop there: it turned up an active leak from a rubber hose inside the AquaCal heat pump cabinet, a non-functional salt chlorine generator, water clarity severe enough to be a safety concern, evidence of prior epoxy leak repairs at the skimmer and light niche, and several code items around bonding and electrical covers. None of that would have surfaced from a plumbing-only leak test. All of it went into the written report.
Who Typically Needs an Inspection
Home buyers under contract, wanting to know the real condition of the pool before closing, not just whether it's currently leaking. HOAs documenting the condition of a shared or community pool. Insurance companies requesting a condition report. And owners of an older pool who want the full picture, plumbing, equipment, chemistry, and safety, before making renovation decisions, similar to the pre-renovation evaluation we did at a home in Palm Beach Gardens.
Jeff David, Leak and Subsurface Locators
People assume an inspection is just a leak test with extra paperwork. It isn't. The plumbing can hold pressure perfectly and the pool can still have real problems, an active leak in the heater, chemistry so far out of range it's a safety issue, past repairs nobody disclosed. An inspection is built to catch all of that, not just answer "is it leaking."
If you're buying a home, sitting on an HOA board, or just inheriting a pool you don't know the history of, that's what this service is for.
Schedule a Pool Leak Inspection
Licensed CPC1457277. Full diagnostic tool stack, water chemistry, equipment, and safety review. Written report on every visit.
Broward (954) 290-5177 Palm Beach (561) 325-2678Frequently Asked Questions
What is a pool leak inspection?
A pool leak inspection is a full evaluation of the pool and equipment, not just a search for one leak. It covers pressure testing every plumbing line, checking the pump, heater, and salt system, testing water chemistry, and reviewing safety items like bonding and barriers. Everything is documented in a written report, whether or not a leak is found.
How is an inspection different from a standard leak detection visit?
A leak detection visit responds to a specific complaint, the pool is losing water, and focuses on finding that leak. An inspection covers the whole system, plumbing, equipment, chemistry, and safety compliance, and produces a written report even when no active leak turns up. Inspections are common before a home purchase or for HOA and insurance documentation.
Who typically needs a pool leak inspection?
Home buyers during a real estate transaction, HOAs documenting a shared or community pool, insurance companies requesting a condition report, and owners who want a full picture of an older pool's condition before making renovation decisions.
Does an inspection include a written report?
Yes. Every inspection produces a written report with the findings, whether the pool held pressure, what equipment issues were found, water chemistry results, and any safety code items, so there is a record for the buyer, HOA, or insurer.